AutoPlast
Cold curing denture base acrylic
Now you can really go with the flow.
AutoPlast was specially developed for the silicone matrix technique and for the pouring technique. Excellent flow properties are the hallmark of this cold curing acrylic.
The pouring phase is approximately 3 minutes. After a transition phase of 5 to 6 minutes, the material can be modelled during a further period of 3 minutes. This means that several denture base segments can be handled simply and reliably using the pouring technique. Consistency and working time can be individually adjusted by changing the dosage of powder and liquid.
Benefits
- Simple handling
- Very good flow and modeling characteristics
- Long working time
- Dosage as required
Delivery scope
Polymer |
Monomer |
|
| Small pack | 250 g | 150 ml |
| Standard pack | 1000 g | 500 ml |
| Laboratory pack | 2500 g | 1000 ml |
Packs include dosage system.
All powders and liquids can also be supplied separately.
Color system
5 Pink-V, pink, veined
6 Pink-K, transparent pink, non-veined
34 Opaque dark pink, veined
